INFRATEK Switzerland ITL-101 Power Transmitter



ITL-100 Universal Power Transmitter

The Model ITL101 Broad Band Power Transmitters can be tailored to your needs and are suitable for DC, 50/60/400Hz power line, frequency inverter, and other electronic drives.

Features...

  • Suitable for DC, power lines, inverters
  • 1-, 2-, 3-, and multi-phase
  • Isolated channels each phase (3000V)
  • DC-50kHz, Option DC-100kHz
  • Fast response output for process control
  • Outputs: ±20mA / ±5V for power, 3600 Pulses / hour for energy
  • 0.2 % accuracy
  • Wide voltage range 10V-600V
  • Wide current range 10mA-20A, extendable to 3000A
  • Multi-phase: two outputs for power
ITL-101 Models Specifications Diagrams Datasheet

Yields Correct Power For Any Wave Form

The ITL101 Broad Band DC-50kHz Power Transmitters are available as single-phase, 2-phase (ARON), 3-phase, and multi-phase versions (e.g. channel 1/2 in ARON, 0-20mA output; channel 3 for DC-power, 0-5V output). In addition to the standard current- and voltage ranges special ranges for current 10mA-20A, and voltage, 10V-600V, can be supplied. 3000Vac channel to channel - and channel to output isolation results in maximum freedom for input connections. The ITL101 withstands fast common mode transients and can be used in frequency inverters and other electronically switched loads. Available options are: DC-100kHz, non-standard voltage range, non-standard current range, 40ms response output for process control, energy output (3600 pulses per hour for full scale), bipolar output to measure recuperated power, and single- and three phase 0-100A current sensors.
Top

ITL-101 Selection Guide

Selections: ITL101-1: Single phase transmitter, specify voltage and current
ITL101-2: 2-phase transmitter (ARON), specify voltage and current
ITL101-3: 3-phase transmitter, specify voltage and current
ITL101-4: 2-phase transmitter (ARON), output 0-20mA; 1-phase transmitter
output 1, 0-5V, specify voltages and currents.

Options

Option Description
01 Frequency range DC-100kHz
02 Non-standard voltage range, specify
03 Non-standard current range, specify
04 40ms response time for process control
05 Energy output, 3600 TTL-pulses per hour at full scale
06 Bipolar output 0-±20mA, 0-±5V
07 Single- and three phase current sensor 0-100Arms / 150A dc.
Wire size 7x12mm, case 70x100x142mm.



Top

ITL-101 Specification

ITL-101 Transmitter Current Ranges In ITL101-1/2/3/4: 1A, 2A, 5A, 10A, 20A; working range: 0-150 %; DC-50kHz
Voltage Ranges Un ITL101-1/3: 120V, 250V; ITL101-2/4: 200V, 400V; working range: 0-150 %; DC-50kHz
Power Ranges ITL101-1: voltage x current;
ITL-101-2: 2 x voltage x current;
ITL101-3: 3 x voltage x current;
corresponds to 20mA or 5V.
Power Accuracy 40-400Hz: 0.1 % reading +0.2 % range (0.2 % typical) 0≤PF≤1;
DC, 400-1000Hz: 0.3 % reading +0.2 % range, 0.7≤PF≤1;
1kHz-10kHz: 1 % typical
Output 0-20mA, 0-5V; Bipolar output optional
Overload continuous Voltage: 1.5 x Un; current: In/10A, 3 x In; In = 20A, 1.5 x In.
Overload 1 second Voltage: 3 x Un; current: In/10A, 5 x In; In = 20A, 2 x In.
Input-output isolation 3kV / 50Hz / 1 minute
Temp. coefficient -10°C to + 50°C; 0.002 % / deg. C
Supply 230V / 50Hz / 3VA; 115V/60Hz/3VA
Case Light gray. Polycarbo / ABS case, wall mounting (M4 x15, 85 x 50mm)
Support rail mounting (DIN EN 50022-35)
Size/Weight H x W x D = 70 x 100 x 115mm; 400gr.

Top

Connection Diagrams


Dimensions